MDX-70D Case for Canon 70D #06169
MDX-70D housing (black) (housing only)
Product no. 06169
NO LONGER AVAILABLE
Optical YS Converter / C can be installed in the housing.
Compatible with the new Optical YS Converter / C1 for MDX housing, which converts the camera's hot shoe TTL signal into a light signal. Both TTL and manual flashes can be used from within the housing and controlled using a Fiber-Optical cable II.
* Fiber-Optical cable II is required when using the YS optical converter.
Compatible with both VF180 1.2x and VF45 1.2x viewfinders
By attaching the VF180 (# 46112) or the VF45 prism finders (# 46111) (magnification ratio 1.2x) to the housing, magnification increases by 1.2x and the entire field of view can be seen at the same time. Recommended for users who strive for strict composition and focus.
Port can be replaced without opening the housing
Gate locking can now be activated from outside the housing. The housing is also equipped with a "lens lock button" which allows the lens to be changed without opening the housing. The gate lock can also be activated from the inside, like previous SEA enclosures.
The multi-selector (which is often used underwater) has the same design as the camera control and can be operated in eight directions in the same way.
The multi-selector is located on the right-hand side of the back of the case, so it is easily accessible and can be operated with your hand on the handle.
MDX-70D Other functions
-Equipped with two Fibre Optical cable inputs. With the camera's built-in flash up and fibre-optic cables mounted, external flash units can be activated as "slave units" by the built-in flash.
-Every detail of the housing is precisely machined. The housing is protected by a highly corrosion-resistant coating. All edges are carefully polished for a perfect finish.
-Controls all essential functions of the Canon EOS 70D underwater. (The depth-of-field button and the LCD panel illumination button cannot be operated from inside the housing).
-The camera's built-in flash can be activated and deactivated from inside the housing. (This function cannot be used if the optional light monitor plate is attached).
-Equipped with an accessory port that can be used for HDMI output.
-The tension of the shutter release button can be adjusted in 2 steps with a spring.
-Equipped with two zinc diodes (one at the front and the other at the back) to prevent damage from electrolysis.
-The grips are designed with the travelling diver in mind. They are assembled with threadless fittings for easy removal, transport and assembly. The new design also reduces corrosion around the fittings. All fittings are available as spare parts.
-Fitted with a tripod connection at the bottom centre of the housing.
-Equipped with the optical viewfinder standard 0.5x. Other (optional) interchangeable viewfinders can be used.
-The quick shoe makes the camera easy to install and remove from the housing.
-Built-in leak sensor warns you immediately of water penetration.
-Depth of 100 m / 330 ft makes it ideal for technical diving.
MDX-70D [Construction] Body: Corrosion-resistant aluminium alloy (machined)
Grip: corrosion-resistant cast aluminium alloy
[Depth assessment] 100m / 330ft
[Dimensions (WxHxD)] 337 x 191 x 140 mm / 13.3 x 7.5 x 5.5 inches
[Weight] Approx. 2,700 g / 94.5oz. (Case only)